全球鋼材百科網
B4簡介

牌號 B4
對應標準 BS 3100-1991
一般工程用鑄鋼件
Specification for Steel castings for general engineering purposes
歸類 鑄鋼
標簽 高溫用合金鋼鑄鋼
B4 化學元素成分含量(%)
成分 C Si Mn P S Cr Ni ② Cu ② Mo
最小值 - - 0.3 - - 2.5 - - 0.35
最大值 0.25 0.75 0.7 0.04 0.04 3.5 0.4 0.3 0.6
①碳含量每降低0.01%，最大錳含量則增加0.04%，允許最大錳含量到1.1%
②殘余元素。 碳當量計算
B4 機械性能
熱處理或狀態
抗拉強度
σb
Mpa 		屈服點
σs
Mpa 		斷后伸長率或延伸率
δ
% 		沖擊吸收能量
KV2
J
N+T或OQ+T或WQ+T(T 720°C max) ≥620 ≥370 ≥13 ≥25
A=for anneal by heating to a temperature above the AC3 and cool in the furnace
N=for normalize by heating to a temperature above the AC3 and cool in still air
OQ=for quench into oil from a temperature above the AC3
WQ=for quench into water from a temperature above the AC3
AH=for air harden by heating to a temperature above the AC3 and cool in air at a rate fast enough to produce a hardened microstructure
T=for temper by heating to a temperature below AC1
ST=for solution treat by heating to temperature high enough to dissolve and any intermetallic phases followed by a rapid cool. 如果買方要求對這些等級進行沖擊試驗，則不進行彎曲試驗。
全球鋼材百科網