全球鋼材百科網
2205 HS簡介

牌號 2205 HS
美國UNS S32205 HS
對應標準 ASTM A313/A313M-2018
不銹鋼彈簧絲
Stainless Steel Spring Wire
歸類 雙相不銹鋼
標簽 奧氏體-鐵素體
說明 “HS”高強度
本標準適用于制造彈簧的奧氏體、奧氏體-鐵素體、沉淀硬化不銹鋼圓鋼絲。
2205 HS 化學元素成分含量(%)
成分 C Si Mn P S Cr Ni Mo N
最小值 - - - - - 22 4.5 3 0.14
最大值 0.03 1 2 0.03 0.02 23 6.5 3.5 0.2
碳當量計算
2205 HS 機械性能
直徑
d
mm		 抗拉強度
σb
Mpa
0.2≤d≤0.7 2370~2730
0.7＜d≤0.8 2230~2570
0.8＜d≤1 2140~2460
1＜d≤1.5 2090~2410
1.5＜d≤2 2000~2300
2＜d≤2.5 1910~2190
2.5＜d≤3 1860~2140
3＜d≤3.5 1810~2090
3.5＜d≤4 1770~2030
4＜d≤4.5 1720~1980
4.5＜d≤5 1670~1930
注：Tensile requirements for high strength cold drawn, as-delivered wire. Tensile strength can be increased by 29 ksi [200 MPa] up to 65 ksi [450 MPa] by tempering depending on tensile and tempering conditions. Recommendations: 840°F [450℃]/1~3 h for batch tempering; 950°F [500°C] for 3 to 10 minutes in a continuous conveyor furnace. Shorter times may result in uneven tempering.
During storage, the tensile strength will increase somewhat due to aging. Depending on the storage conditions, the tensile strength can Increase by 0~12ksi [0~80 MPa].
全球鋼材百科網