全球鋼材百科網
309C32簡介

牌號 309C32
對應標準 BS 3100-1991
一般工程用鑄鋼件
Specification for Steel castings for general engineering purposes
歸類 鑄鋼
性能 耐腐蝕
標簽 耐熱不銹鑄鋼 有磁性
309C32 化學元素成分含量(%)
成分 C Si Mn P S Cr Ni Mo N
最小值 0.2 - - - - 24 11 - -
最大值 0.45 1.5 2.5 0.04 0.04 28 14 1.5 0.2
碳當量計算
309C32 機械性能
熱處理或狀態
抗拉強度
σb
Mpa 		斷后伸長率或延伸率
δ
%
As cast ≥560 ≥3
A=for anneal by heating to a temperature above the AC3 and cool in the furnace
N=for normalize by heating to a temperature above the AC3 and cool in still air
OQ=for quench into oil from a temperature above the AC3
WQ=for quench into water from a temperature above the AC3
AH=for air harden by heating to a temperature above the AC3 and cool in air at a rate fast enough to produce a hardened microstructure
T=for temper by heating to a temperature below AC1
ST=for solution treat by heating to temperature high enough to dissolve and any intermetallic phases followed by a rapid cool. ①For steel 309C32, test pieces are heat treated for 24h at 760°C±15°C and cooled in air
全球鋼材百科網