全球鋼材百科網
B861 Grade 23簡介

牌號 B861 Grade 23
美國UNS R56407
對應標準 ASTM B861-2019
鈦及鈦合金無縫管
Titanium and Titanium Alloy Seamless Pipe
歸類 鈦及鈦合金
B861 Grade 23 化學元素成分含量(%)
成分 Fe C N V Al H O 其他單個 其他合計 更多
最小值 - - - 3.5 5.5 - - - - Ti:余量
最大值 0.25 0.08 0.03 4.5 6.5 0.0125 0.13 0.1 0.4
其他單個或其他合計化學成分包括表中未指定值的化學成分。只有在假定存在或在常規分析中，且有跡象表明其成分將超過規定值的情況下，才應進行分析。 ① At minimum, the analysis of samples from the top and bottom of the ingot shall be completed and reported for all elements listed for the respective grade in this table.
② Final product hydrogen shall be reported. Ingot hydrogen need not be reported. Lower hydrogen may be obtained by negotiation with the manufacturer.
③ Single values are maximum. The percentage of titanium is determined by difference.
④ Other elements need not be reported unless the concentration level is greater than 0.1 % each, or 0.4 % total. Other elements may not be added intentionally. Other elements may be present in titanium or titanium
alloys in small quantities and are inherent to the manufacturing process. In titanium these elements typically include aluminum, vanadium, tin, chromium, molybdenum, niobium, zirconium, hafnium, bismuth, ruthenium,
palladium, yttrium, copper, silicon, cobalt, tantalum, nickel, boron, manganese, and tungsten.
⑤ The purchaser may, in the written purchase order, request analysis for specific elements not listed in this specification.
B861 Grade 23 機械性能
抗拉強度
σb
Mpa 		屈服點
σs
Mpa 		斷后伸長率或延伸率
δ
%
≥828 ≥759 ≥10
*Properties for annealed condition except as noted.
全球鋼材百科網