全球鋼材百科網
AMS 5596簡介

牌號 AMS 5596
對應標準 SAE AMS 5596 M-2017
鎳合金，耐腐蝕和耐熱，薄板，帶材，箔材和板材
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate, 52.5Ni - 19Cr - 3.0Mo - 5.1 Cb (Nb) - 0.90Ti - 0.50AI - 18Fe, Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968°C) Solution Heat Treated
歸類 合金鋼
AMS 5596 化學元素成分含量(%)
成分 C Si Mn P S Cr Ni Cu Mo Ti Nb B Co Al Ta 更多
最小值 - - - - - 17 50 - 2.8 0.65 4.75 - - 0.2 - Fe余量
最大值 0.08 0.35 0.35 0.015 0.015 21 55 0.3 3.3 1.15 5.5 0.006 1 0.8 0.05
AMS 5596 機械性能
厚度
t
mm		 熱處理或狀態
抗拉強度
σb
Mpa 		屈服點
σs
Mpa 		斷后伸長率或延伸率
δ
% 		硬度
HBW
t≤0.01 As Solution ≤965 report
0.01＜t≤0.1874 As Solution ≤965 ≥30 HRB
≤102
0.1874＜t≤1.00 As Solution ≤1034 ≥30 HRC
≥25
t≤0.25 After Precipitation/At Room Temperature ≥1241 ≥1034 report
0.25＜t≤25.4 After Precipitation/At Room Temperature ≥1241 ≥1034 ≥12
t≤0.64 After Precipitation/At 649 °C ≥965 ≥793 ≥5
0.64＜t≤25.4 After Precipitation/At 649 °C ≥1000 ≥827 ≥5
注1：Elongation in 2 Inches or 4D.
注2：At Room Temperature：Determined in accordance with ASTM E8/E8M.
注3：At 1200 °F (649 °C)：Determined in accordance with ASTM E21 on specimens heated to 1200 °F 土5 °F (649 °C 士3 °C) , held at heat for not less than 20 minutes before testing, and tested at 1200 ° F 士5 °F (649 °C 士3 °C) .
全球鋼材百科網