全球鋼材百科網
CR1180T/ 825Y-MP簡介

牌號 CR1180T/ 825Y-MP
對應標準 GMW 3399-2013
多相超高強度鋼板
Multi-phase and Ultra-high Strength Sheet Steel
歸類 合金鋼
標簽 冷軋盤卷和薄板 多相鋼MP
說明 多相鋼MP(鐵素體+馬氏體+貝氏體+沉淀硬化)
CR1180T/ 825Y-MP 化學元素成分含量(%)
成分 C Si *** Mn P S Cu B Al 更多
最小值 - - - - - - - 0.015 (Ni+Cr+Mo)<1.5*
最大值 0.23 0.5 3 0.04 0.015 0.2 0.005 -
注：表中為成品（盤卷或薄板）分析 *需要是可添加
**Limited use grades only. Consult Materials Engineering prior to specifying these grades.
***May contain up to 2% Si maximum. This materials is not to be spot welded without weld verification and approval by the GM Welding Technology Group. 碳當量計算
CR1180T/ 825Y-MP 機械性能
熱處理或狀態
抗拉強度
σb
Mpa 		屈服點
σs
Mpa 		斷后伸長率或延伸率
δ
%
冷軋 ≥1180 825~1150 *
≥5
*表中是ISO Ⅰ試樣，標距L0=50mm時的值；JIS試樣，標距L0=50mm時的延伸率≥6%；ISO Ⅱ試樣，標距L0=80mm時延伸率≥4%
**CR1180/825Y-MP is intended for roll forming and simple bending/flange applications and for limited use only. Consult Materials Engineering prior to specifying this grade.
全球鋼材百科網